Filter
Top Products
5-1
5. INPUT/OUTPUT DATA
5.1 Radar Processor Unit
Input and output data are shown in the table below.
Input
Output
5.2 Processor Unit
Input and output data are shown in the table below.
Input
*: Data input cycle should be more than 40 Hz (HSC) or 20 Hz (normal ship speed).
Output
**: The output sentence, mode and baud rate can be set at the TT Preset menu.
Data Specification Contents Remarks
Heading signal sycrhro or step GC-10 required
AD-10 format External AD-100
Data Specification Contents Remarks
Remote display signal HD, BP Trigger,
Video
2 ports
Data Specification Contents Remarks
Heading signal IEC61162-2*
Speed signal IEC 61162-1 Ed.4
Navaid data IEC 61162-1 Ed.4 Position, time and
date, datum, course,
speed, wind, current,
depth, temperature,
NAVTEX, etc.
AIS signal IEC 61162-2
Alarm handling
signal
Contact closure Input from alarm system
IEC 61162-1 Ed.4 Input from alarm system
Data Specification Contents Remarks
Radar system data IEC 61162-1 Ed.4 RSD, OSD
TT data** IEC 61162-1 Ed.4 TTD, TTM, TLB
Alarm signal IEC 61162-1 Ed.4 4 systems, Output content
are selected by menu.
Contact closure