Filter
Top Products
5-18
Server Configuration and Utilities
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
File Name: F-CH05.DOC Last Saved On: 1/5/99 11:24 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
IBM OS/2 Device Drivers from Compaq
Your server must have certain device drivers for some server options to operate
using IBM OS/2 Warp Server 4.0, IBM OS/2 Warp Server 4.0 SMP, IBM OS/2
Warp, IBM OS/2 Warp Connect 3.0, and OS/2 2.x. These drivers are located on
the Compaq SmartStart and Support Software CD you received with your
server. If you use SmartStart to install your operating system, these drivers are
loaded automatically. Otherwise, you can use SmartStart to create an OS/2
Support Software Diskette (SSD) from Compaq to support a manual installation
of OS/2.
For more information on these drivers, run the README.COM file in the root
directory of the IBM OS/2 SSD from Compaq.
Manual installation
If you choose not to let SmartStart configure the server:
1. Insert the Compaq SmartStart and Support Software CD into the drive.
2. Boot your system.
3. Select Manual Installation.
4. Follow the instructions that display on the monitor.