Filter
Top Products
4-10
Installing Hardware Options
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
File Name: E-CH04.DOC Last Saved On: 1/12/99 1:28 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Installing DIMM Memory
1. Prepare the server for installation. See section "Preparing the Server,"
outlined earlier in this chapter.
2. Install DIMMs as shown in Figure 4-5. For information on populating
memory sockets, see the following section titled “Memory Sockets.”
Figure 4-5. Latching DIMMs
3. Restore server to normal operation. Reverse steps in section, "Preparing
the Server."