Filter
Top Products
1-7
Compaq ProLiant 3000 Servers Setup and Installation Guide
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
File Name: B-CH01.DOC Last Saved On: 1/5/99 11:24 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Disk Drive Fault Tolerance
Disk drive fault tolerance for Compaq servers is covered in more detail in the
Compaq Server Online Reference Guide on the Systems Reference Library
(SRL) CD. The following Redundant Array of Inexpensive Disks (RAID) types
are supported:
■ RAID 0 - no fault tolerance
■ RAID 1 - mirroring
■ RAID 4 - data guarding
■ RAID 5 - distributed data guarding
Compaq Insight Manager
Compaq Insight Manager is an easy-to-use utility for collecting server
information. This information is used by Insight Manager to perform the
following functions:
■ Sends fault condition alerts to a predetermined destination
■ Monitors fault conditions and server performance
■ Controls server security and configuration
■ Remotely controls servers
■ Initiates rapid recovery services
■ Web browser access for monitoring of management information
In Compaq servers, every hardware subsystem, such as disk storage, system
memory, and system processor, has a robust set of management capabilities.
Compaq Full-Spectrum Fault Management prevents faults before they happen,
keeps the system up and running in the unlikely event of a failure, and delivers
rapid server recovery to normal operation after a fault. See Chapter 5, “Server
Configuration and Utilities,” for more information.