Filter
Top Products
Introduction
1-4
NOTE:
To determine whether you are using the proper issue of the Getting
Started Guide for the PassageWay Service Provider installed on your
PC, perform the following steps:
a. Start the PassageWay Configurator.
If you have Windows 95 or Windows NT 4.0 or later, select
PassageWay Configurator
from the application folder that
contains the PassageWay Service Provider. (The default
application folder is
PassageWay for PARTNER
.)
If you have Windows 3.1 or later or Windows for Workgroups 3.11
or later, open the program group that contains the PassageWay
Service Provider, and double-click on the PassageWay
Configurator icon. (The default program group is
PassageWay
for PARTNER
.)
The PassageWay Configurator - COM Port dialog box appears.
b. Choose the Help button.
c. Depending on your system, perform one of the following steps:
If you have Windows 95 or Windows NT 4.0 or later, choose
Version
from the Help menu. The Version Information message
box appears, displaying the issue of the Getting Started Guide
that the software requires. The issue number should match the
issue number on the cover of this book.
If you have Windows 3.1 or later or Windows for Workgroups 3.11
or later, choose
About Help
from the Help menu. The About
Help message box appears, displaying the issue of the Getting
Started Guide that the software requires. The issue number
should match the issue number on the cover of this book.
d. Choose the OK button.