Filter
Top Products
Installing and Configuring the PassageWay
Service Provider
2-11
P
h
o
n
e
L
in
e
Line Cord
Figure 2-2. Connecting the Line Cord to the PassageWay Adapter
4. Determine the type of serial port (9 pin or 25 pin) you have on your
PC. If you have a 9-pin serial port, you will use the 9-pin to 25-pin
adapter.
5. Connect the DB-25 connector on the PassageWay adapter to the
serial (COM) port on your PC. If your PC has a 9-pin serial (COM)
port, connect the 9-pin to 25-pin adapter to the 9-pin serial (COM)
port, and then connect the PassageWay adapter to the 25-pin
connector on the 9-pin to 25-pin adapter.