Filter
Top Products
Troubleshooting
4-8
Problem 13: You cannot make or answer calls via your TAPI application.
If you are trying to use your TAPI application and find that it is unable to
initiate a call or an incoming call is not seen by the application, it is possible
that the PC link to the PARTNER adapter has not been properly established.
To verify whether this is the cause of the failure, you should restart all of your
telephony applications and try the application again.
Please keep in mind that there are many types of applications that classify as
telephony applications. For example, Microsoft Exchange and Microsoft
Schedule+ are both telephony applications. If either are running, they will
have to be shutdown and restarted.
Problem 14: Your TAPI application does not properly reflect the status
of your phone.
During the use of your application, it is possible that the application may get
out of sync with the phone. There are many reasons why this may occur.
Some of these reasons may be attributed to some of the issues documented
in the above items.
If you are experiencing these problems, such as “phantom calls,” where there
are calls displayed on the application without a corresponding call on the
phone, or the opposite, where there are calls on the phone that are not
displayed on the application, then you should restart the application and any
other telephony application that you have running on your system.
Please keep in mind that there are many types of applications that classify as
telephony applications. For example, Microsoft Exchange and Microsoft
Schedule+ are both telephony applications. If either are running, they will
have to be shutdown and restarted.