Filter
Top Products
Installing and Configuring the PassageWay
Service Provider
2-19
the location and telephone number of each outside line button on
your telephone
the location of feature buttons on your telephone
NOTE:
The PassageWay Configurator does not verify whether the
information you enter is correct. When you run a TAPI application
(for example, Microsoft Dialer), the PassageWay Service Provider
tries to use the information you entered via the PassageWay
Configurator. If the information you entered in the PassageWay
Configurator was correct, the TAPI application works properly. If
any of the information you entered is incorrect, the TAPI
application will not work. You must then run the PassageWay
Configurator and change the incorrect information.
The Find PassageWay Link dialog box enables you to have the
PassageWay Configurator determine the COM port to which your
PassageWay adapter is connected.
15. Choose the Yes button.
If the PassageWay Configurator found the COM port to which your
PassageWay adapter is connected, a message box appears, stating
that the PassageWay link was found and providing the number of the
COM port. Choose the OK button. The PassageWay Configurator -
COM Port dialog box appears, and the option button for the
corresponding COM port is selected.
If the PassageWay Configurator did not find the COM port to which
your PassageWay adapter is connected, the PassageWay Link Not
Found message box appears. Choose the OK button. The
PassageWay Configurator - COM Port dialog box appears, and no
COM port option button is selected.