Filter
Top Products
Installing and Configuring the PassageWay
Service Provider
2-10
Installing the PassageWay Adapter
This section describes how to connect the PassageWay adapter to your
telephone, your PC, and the line jack. The PassageWay adapter provides an
interface between the serial port on your PC and the Line jack on your
telephone, enabling you to access the PARTNER system from your PC. The
PassageWay adapter has a DB-25 connector for 25-pin serial ports. If you
have a 9-pin serial port on your PC, use the 9-pin to 25-pin adapter included
with PassageWay Solution to connect your PassageWay adapter to your serial
port.
NOTE:
Do not install the PassageWay adapter while you are active on a call.
To install the PassageWay adapter:
1. Turn off your PC.
2. Unplug the line cord from your telephone.
3. Connect the line cord to the jack labeled “Line” on the PassageWay
adapter (Figure 2-2).