Filter
Top Products
Installing and Configuring the PassageWay
Service Provider
2-17
If you are using Windows 95 or Windows NT 4.0 or later, the Creating
Application Folder & Short Cuts message box appears.
If you are using Windows 3.1 or later, the Creating Program Group &
Icons message box appears.
13. Choose the OK button.
The Installation Completed message box appears.
14. Choose the Finish button.
If you are using Windows 95 or Windows 4.0 or later, the PassageWay
Configurator is launched, and it displays the Find PassageWay Link
dialog box.
If you are using Windows 3.1 or later, the Configuring PassageWay
Service Provider message box appears. Perform the following steps:
a. Choose the OK button in the Configuring PassageWay Service
Provider message box.
The Telephony window appears.
b. In the Telephony window, choose the Driver Setup button.
The Telephony Drivers dialog box appears.
c. Perform one of the following steps:
If the Lucent PassageWay Service Provider is listed in the
Telephony Drivers dialog box, select it, and then choose the
Setup button.
If the Lucent PassageWay Service Provider is not listed in the
Telephony Drivers dialog box:
i. Choose the Add button.
The Add Driver dialog box appears.
ii. Select the Lucent PassageWay Service Provider, and then
choose the Add button.