Filter
Top Products
component troubleshooting procedures.
1.5 System Peripherals
The DNCP Series 400/400-CO (PA-8500) can include the peripherals described in the following sections.
V105 Terminal ●
C419/C619 Modem ●
Tape and CD-ROM Drives ●
V105 Terminal
The V105 terminal, which is shipped with most DNCP Series 400/400-CO (PA-8500) systems, is an ASCII
character-mode terminal that can be configured to operate as a system console to display system error and status
information. The V105 can also be used as a standard user terminal for communicating with system applications. It is
available with either an ANSI or PC keyboard. The V105 connects to either the Console (J315) or Auxiliary Console
(J316) serial port on the rear of the cabinet. For an illustration of the V105 terminal, (See Figure 1.10)
Figure 1.10. V105 Terminal
DNCP Series 400/400-CO (PA-8500) systems can also support other terminals as long as they are properly defined within
the system.
C419/C619 Modem
DNCP Series 400/400-CO (PA-8500) systems are connected to the Lucent Customer Assistance Center (CAC) through a
C419/C619 modem and a dedicated telephone line. The C419/C619 modem is preconfigured for RSN operation and can
transmit data at 33,600 bps. For an explanation of the RSN, refer to FTX System Administrator's Guide: General Services
(R455X). For an illustration of the C419/C619 modem, See Figure 1.11.
Figure 1.11 C419/C619 Modem
Chapter 1
]