Filter
Top Products
Chapter 5
/
usr
/stratus/
rsn
/bin/
rsntry
The script calls the hub telephone number you specified with rsnadmin and attempts to verify the
connection. If the script concludes with a success message, the RSN is installed and configured correctly.
The system then displays the root prompt. You can now prepare and send the installation report.
/usr/stratus/rsn/bin/rsntrans -r1 -sHUB -z -f -x0
waiting for connect message.....
16:49:56 C connected after 1 attempt(s) ====================
16:49:57 T line_swap
16:49:58 R line_swap
16:49:58 T master done with conversation
16:49:58 Conversation Complete: SUCCEEDED
#
If the hub telephone number for your region does not work, first check to see if the phone line has a dial
tone. Also check the hub_phone_1 value in the RSNADMIN database and make sure that it is correctly
entered.