Filter
Top Products
If the tape drive is the first drive in the daisy chain and a terminator is connected to either tape-drive port, remove the
terminator.
Turn off (0) the power switch on each tape drive, See Figure 3.11 .
5.
Figure 3.11. Powering Down the T800-Series( 2nd)
Connect the SCSI cables, (part number AW-B21000-12) to the rear of the tape drive and to the U501 SCSI card in
slot 7 of the PCI card cages. See Figure 3.12.
6.
Figure 3.12. SCSI Cables: Daisy-Chained T800-Series
Chapter 3