Filter
Top Products
Enter Selection (1 2): 1
4. A prompt asks for verification of the system site ID. The default site ID is the same as the site ID on the S.O. (Sales Order) pick
list which arrived with the shipping carton (shown in bold in the example below).
Report Name: COP-3136 S.O. PICKLIST Page:
1
Report Date: 05/15/99 =============
BILL OF MATERIAL EFFECTIVITY DATE: 05/15/99
ORDER NO.: US 113370
SHIP-TO: 01923 BILL-TO: 01932 SID TECH: J.
Bond
Company X Company X
55 Main Blvd. 55 Main Blvd. SHIPPER: XXX
Inc.
Boston, MA 02116 Boston, MA 02116
USA USA CPU SER:60029 RA
KIT:N
INSP BY:M.Jones
SITE SR:
N/A___Y___N__
ATTN:PAM SMITH ATTN:
PHONE:X2502 PHONE:
SITE-ID: comp_x ORDER STATUS: APPROVED
Verify this site ID. If this is the same site ID value specified with the rsnadmin command, as described in the Configuring the
RSN section of Chapter 5, press the <Return> key.
(FTX Customer Installation Reporter - Rev 1.0)
Installation of a Stratus Module
Verify the Site id & System node name currently set on the system.
(If correct, press <return> or enter correct name).
System site id = "comp_x":
5. When the <Return> key is pressed, a prompt asks for verification of the system node name. The default node name is the same
as the site ID. To verify the node name, press the <Return> key. A different node name can be entered and saved by pressing the
<Return> key. If a different node name is entered, log in as superuser when completing the installation report, and change the
actual node name value with the uname -S command.
6. When the <Return> key is pressed, prompting occurs, one field at a time, for additional information about the site. After a field
is completed, press the <Return> key to move to the next field.
Company: Lucent Technologies
Street address: 55 Fairbanks Blvd
City: Marlboro
State or Country: MA
Chapter 6