Filter
Top Products
14. After a method is chosen, refer to the next section, "Sending an Installation Report to the CAC," for report-sending
instructions.
6.2 Sending an Installation Report to the CAC
The following sections, Sending the Installation Report Via the RSN , Sending the Installation Report Via the Internet , and
Saving the Installation Report to a Temporary File, describe methods for sending the installation report to the CAC.
A version of the installation report is always automatically saved in the /tmp
directory. The contents of the /tmp directory are deleted by certain programs each
time the system reboots. To permanently save the installation report, move it to a
secure directory; since the report contains password information.
6.2.1 Sending the Installation Report Via the RSN
If the value 1 is specified on the install_report script to send the installation report to a Lucent CAC hub via the RSN, the
script displays the following information.
Enter Selection (1 2 3): 1
Queueing Install Report on RSN to be sent to Support HUB....
Queueing Complete!
Creating a permanent copy of the temporary install report /tmp/IRF2222 as
/tmp/INRP0123:0916.
** Install Report Process Finished **
The installation is now complete.
6.2.2 Sending the Installation Report Via the Internet
If the value 2 is specified on the install_report script to send the installation report to a Lucent CAC hub via the Internet,
the script displays the following prompt. Specify the number that corresponds to the site location.
Enter Selection (1 2 3): 3
Mail is based on location of system being installed.
Location options:
(1) Europe/Middle East/Africa
(2) Asia/Far East/Australia/Oceania
(3) North, Central, and South America
(4) User specified mail address
Enter Selection (1 2 3 4): 3
Sending Mail ....
Mailing Complete!
Creating a permanent copy of the temporary install report /tmp/IRF2232 as
/tmp/INRP0123:0925.
** Install Report Process Finished **
The installation is now complete.
Chapter 6