Filter
Top Products
Newpoint Technologies, Inc. COMP-USER-006
Salem, NH 03079 Rev. 3.2 –01/31/01
54
As you initiate Compass, you may see the following
message:
Current configuration exceeds actual license. You
must reduce your configuration to match your
license.
Terminating Newpoint Compass core processes...
Failed to enter IDLE state.
Newpoint Compass state changed to STOP.
This message appears because there are too many devices
configured on the Compass node as licensed from Newpoint.
You must reduce the number of devices in the system.
To enter IDLE state and make this change, first remove the
Compass dongle. Then start the system in IDLE state.
Remove devices until the number of licensed devices is not
exceeded. Place the dongle back onto its port and re-start
Compass.
If you require a license upgrade to support additional devices,
contact Newpoint Customer Service for assistance.