Filter
Top Products
24
Chapter 2 Operation
2-1 Switching the Power On and Off
Switching the Power On and Off
This machine has four power switches. You switch on all four when using the machine.
When you finish printing, you turn off switches 2, 3, and 4 as required. You also flip down the loading lever to the
rear of the machine.
WARNING
When leaving the printer unattended after completing operation, be sure to turn
off the power to the machine.
Failure to do so may lead to overheating of the platen or dryer, resulting to fire. Also, inadvert-
ent contact by someone other than the operator may result in sudden operation of the ma-
chine, leading to injury or burns.
Important Note on Switching Off the Power
Never switch off the printer's main power or unplug the power cord
suddenly while operation is in progress. Doing so may damage the
print heads. Be sure to first switch off the sub power.
If the main power is accidental switched off, immediately turn the
main power and sub power back on.
➀ Main power switch
for the printer
We recommend leaving this switched on at all times during ordinary
day-to-day operation. (The machine monitors the dryness of the print
heads which this switch is on.)
➁ Sub power switch
for the printer
Turn this switch on after
closing the front cover. To
turn it off, hold down the
switch for one second or
longer.
➂ Power switches for
the media take-up
and feed systems
➃ Main power switch
for the dryer
This switch lights up when it
is on.
Flip the loading lever down to
the rear when not in use.