Filter
Top Products
4-3 Optimizing Printing to Match Media Thickness
74
Chapter 4 Feature Reference
Description
The movement transfer of media experiences subtle changes due to the thickness of the media and the tempera-
ture of the heating devices. When the movement distance becomes discrepant, horizontal stripes are more likely
to occur during printing. We recommend performing correction to match the media you're using and the heating
devices. Repeat the process of printing a test pattern and entering a correction value a number of times to find
the optimize value.
Printing this test pattern using parameters identical to those for actual printing. Also, using material such as
media scraps that have passed through the printer may not yield correct results.
Note, however, that you can also make this setting on the computer (by, for example, choosing the media type in
the RIP program you are using). Use this feature when you want to make the setting on the printer, without
changing any settings on the computer. When you have made the setting on the computer, the computer's setting
is used and the printer's setting is ignored.
Default Setting
[CALIBRATION]: 0.00%