Filter
Top Products
59
Chapter 3 Maintenance and Adjustment
3-4 Replacing Consumable Parts
Replacing the Wipers
The wipers are components that you use when cleaning the print heads. When
the screen displays a message like the one shown, it means the item needs to be
replaced. Replace with new items.
CAUTION
Be sure to perform operations as specified by these instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
1.
Enter the wiper replacement mode.
➊
Remove any media from the platen and close the front
cover.
➋
Switch off the sub power.
Hold down
and switch on the sub power.
➌
Press to choose [WIPER REPLACE].
Press
.
➍
Preparations are complete when this screen appears.
2.
Remove the right side cover.
➊
Remove the right side cover.
➋
Touch the location shown in the figure to discharge any
static electricity.
Press .
Screws
TIME FOR
WIPER REPLACE
MAINTENANCE
WIPER REPLACE
FINISHED WIPER
REPLACEMENT