Filter
Top Products
43
Chapter 2 Operation
2-4 Starting Printing
Getting Ready to Receive Data from a Computer
When you have finished loading media and making the temperature settings for the heating devices, then follow
the steps below. This procedure enables the machine to receive data from the computer and perform printing.
Procedure
➊
Close the front cover.
➋
Press (making the light come on).
➌
Wait until the light stops flashing and stays steadily lit.
➍
Wait for the dryer to warm up.
➎
Make sure you are at the top menu.
If you are not at the top menu, press , then press .
Printing Is Not Possible in These Situations
➢The machine does not run when the front cover is open. Also, never open it when printing is in progress.
Doing so interrupts printing.
➢Data from the computer is not accepted when
light is dark.
➢
light does not come on when media is loaded incorrectly.
➢Printing does not start until
light comes on.
➢Data from the computer is not accepted when you are not at the top menu.
W 2600 mm
Top menu
Flashing
Steadily lighted
Steadily lighted