Filter
Top Products
2-2 Loading and Cutting Off Media
31
Chapter 2 Operation
4.
Pass the media through the printer and adjust the balance weights.
➊
Before you pass the media through, move the balance weights to match the width of the media.
➋
Pass the media through the rollers until its end reaches the
platen.
Work from the back of the printer.
➌
Pull back the loading lever to keep the threaded media
from slipping and falling off.
Loosen
Tighten
Balance weight
When 1220 to 1372 mm
(48 to 54 inches)
When 1373 to 2032 mm
(54 to 80 inches)
When 2033 to 2641 mm
(80 to 104 inches)