Filter
Top Products
4-3 Optimizing Printing to Match Media Thickness
73
Chapter 4 Feature Reference
Performing Feed Correction to Alleviate Horizontal Bands and the Like
Procedure
1.
Print a test pattern.
➊
Press .
Press
several times.
➋
Press .
Press
to start printing.
2.
Check the test pattern you printed.
3.
Enter the correction value.
Press .
Press
.
Use
to make the setting for the correction value.
Press
to enable the setting.
4.
Go back to the original screen.
Press .
Press
to go back to the original screen.
MENU
CALIBRATION
CALIBRATION
TEST PRINT
Test pattern
Gap present Correct results Overlap
Correction-value
adjustment
Reduce the value. ± 0 Increase the value.
SETTING
0.00% 0.00%
W 2600mm