Filter
Top Products
82
Chapter 4 Feature Reference
4-6 Changing How the Preheater, Print Heater and Dryer Operate
Switching the Dryer On and Off
Procedure
➊
Press .
Press
several times.
➋
Press .
Use
to make the setting.
Press
to enable the setting.
➌
Press .
Press
to go back to the original screen.
Description
To operate the dryer, you must switch on both the main power switch for the printer and the main power switch
for the dryer, and also enable this menu item.
You can also make this setting on the computer. When you have made the setting on the computer, the computer's
setting is used and the printer's setting is ignored.
Default Setting
[DRYER]: ON
MENU
DRYER
DRYER
ON OFF
Switching Off the Preheater and Print Heater
Procedure
➊
Press .
Use
to select the preheater or print heater.
Press
several times to select [OFF].
Press
to enable the setting.
➋
Press .
Press
to go back to the original screen.
Description
This menu is used to make the temperature settings for the preheater and print heater, and you can also use it to
turn these off. When set to [OFF], the preheater and print heater do not operate at all.
Note, however, that you can also make this setting on the computer (by, for example, choosing the media type in
the RIP program you are using). When you have made the setting on the computer, the computer's setting is used
and the printer's setting is ignored.
Default Setting
[PRE] (preheater): 45˚C (112˚F)
[PRINT] (print heater): 45˚C (112˚F)
Preset
temp.
Actual
temp.
PRE OFF 45
PRINT OFF 45
W 2600 mm
SETUP SHEET
W 2600 mm
SETUP SHEET