Filter
Top Products
4-2 Setting the Printing Position and Margins
67
Chapter 4 Feature Reference
3.
Go back to the original screen.
➊
If the front cover is open, then close it.
➋
Press .
Use
to go back to the original screen.
Description
You can perform this operation only when the light is on. To keep the heads from drying out, the ma-
chine forces this operation to end after a certain amount of time has passed. Also, when you want to quit the
operation partway through, use
to select [CANCEL], then press .
Entering the menu moves the head to the position that is currently set, which also lets you confirm the setting
later.
This setting is enabled when the
light has been made to go out, such as by removing the loaded media.
Redoing setup returns the margins to their default values. Note that certain settings may result in printing in areas
where no media is present or on the media clamps.
W 2600mm