Filter
Top Products
2-2 Loading and Cutting Off Media
28
Chapter 2 Operation
■ Media having an inward curl
Press in to fit on securely. Press in to fit on securely.
End cap
Hexagonal wrench
(large)
Hexagonal wrench
(large)
Printed surface
Roll shaft
Roll media
Reinforcement pipe End cap
Reinforcement pipe
Use this when loading media that has a width of 1,880
mm (74 inches) or wider. It reduces sagging of the
roll media.
Reinforcement pipe MediaEnd cap
110 to 130 mm (4.3 to 5 in.)
Adjust the end cap to a position of 110 to 130 mm
(4.3 to 5 in.).
* When using media having a width of 2,540 mm
(100 inches) or more, be sure to position the
media at 110 mm.
* The scale on the media gauge is useful for ad-
justing the position.
Spacer