Filter
Top Products
75
Chapter 4 Feature Reference
4-4 Accommodating Various Kinds of Media
Using Transparent Media
Procedure
1.
Set the media type to "transparent."
➊
Press .
➋
Press .
Use
to select [CLEAR].
Press
to enable the setting.
➌
Press .
Press
to go back to the original screen.
2.
Use the [PRINT AREA] menu to make the settings for the left and right margins.
☞ p 66 "Changing the Left and Right Margins"
Description
The media width can be sensed automatically for opaque media, but not for transparent media. This makes it
necessary to make the setting manually. Ink may be sprayed onto locations where no media is present if the left
and right margins are not set, so be sure to make these settings.
Default Setting
[SHEET TYPE]: OPAQUE
MENU
SHEET TYPE
SHEET TYPE
OPAQUE CLEAR
Printing Hard-to-dry Media
Procedure
➊
Press .
Press
several times.
➋
Press .
Use
to set the value.
Press
to enable the setting.
➌
Press .
Press
to go back to the original screen.
MENU
SCAN INTERVAL
SCAN INTERVAL
OFF 1.0sec
W 2600 mm
SETUP SHEET
W 2600 mm
SETUP SHEET