Filter
Top Products
79
Chapter 4 Feature Reference
4-5 Changing How the Printer Operates
Determining What Happens When Ink Runs Out
Procedure
➊
Press .
Press
several times.
➋
Press twice.
Use
to make the setting.
Press
to enable the setting.
➌
Press .
Press
to go back to the original screen.
Description
This lets you change, according to your purpose, the operation that takes place when an ink cartridge is empty.
[STOP] immediately pauses operation when a cartridge becomes empty. Because pausing printing in progress
may make colors uneven, it is best to ensure a sufficient amount of remaining ink before you begin printing.
[CONT.] (continue) is a mode in which operation is not automatically stopped. When a cartridge becomes
empty, a warning beep sounds, but printing does not stop. (However, operation stops when printing of the
current page ends.) To replace the cartridge, you must either wait until printing ends or press
to pause
printing. Note that operation does not stop even if ink runs out completely.
Default Setting
[EMPTY MODE]: STOP
MENU
INK CONTROL
EMPTY MODE
STOP CONT.
Setting the Interval until Activation of the Sleep Mode
Procedure
➊
Press .
Press
several times.
➋
Press twice.
Use
to make the setting.
Press
to enable the setting.
➌
Press .
Press
to go back to the original screen.
Default Setting
[INTERVAL]: 30MIN
MENU
SLEEP
INTERVAL
30MIN 15MIN
W 2600 mm
SETUP SHEET
W 2600 mm
SETUP SHEET