Filter
Top Products
4-4 Accommodating Various Kinds of Media
77
Chapter 4 Feature Reference
Preventing Media from Coming Loose
Procedure
➊
Press .
Press
several times.
➋
Press .
Use
to set the value.
Press
to enable the setting.
➌
Press .
Press
to go back to the original screen.
Description
The platen uses suction to grip the media and keep it stable. When media comes loose from the platen because
it is warped or wrinkled, increasing the suction force may help correct the problem. Conversely, when the media
is flimsy and cannot move smoothly, reducing the suction force may help.
When set to [AUTO], the suction force is automatically adjusted to the optimal level for the media width.
You can also make this setting on the computer. When you have made the setting on the computer, the computer's
setting is used and the printer's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO
MENU
VACUUM POWER
VACUUM POWER
AUTO 90%
Keeping Media from Being Soiled by Ink Drips
Procedure
➊
Press .
Press
several times.
➋
Press .
Use
to select [ENABLE].
Press
to enable the setting.
➌
Press .
Press
to go back to the original screen.
Description
Ink tends to collect on the surface of the heads when you use media prone to build up a static charge, when the
ambient temperature is low, and at other such times. Under some conditions, this ink may be transferred to the
media. Use this feature at such times. The ink buildup is removed as printing is performed.
Using this feature results in longer printing times. Because printing is paused, colors may also be uneven.
MENU
PERIODIC CL.
PERIODIC CL.
DISABLE ENABLE
W 2600 mm
SETUP SHEET
W 2600 mm
SETUP SHEET