Filter
Top Products
2-8
Chapter 2
Hardware Descriptions
48 Button AOM (Figure 2–8)
y 48 programmable keys
y Up to four can be assigned to any DCS keyset to provide
additional programmable keys
DCS Series Keyset Daughterboards
KDB-DLI
This daughterboard can be installed only in a 12B or 24B keyset. The KDB-DLI provides one
additional DLI circuit for the connection of any digital station device such as a keyset, add-on
module or DPIM. The KDB-DLI will only operate when the keyset is connected to a DLI port
on the base board so it can use the second B channel. Each port is intended for connection
to one telephone. Connecting multiple telephones to a port may result in incorrect operation.
(See Chapter 3 of the Samsung iDCS100 Installation Manual for details.)
KDB-SLI
This daughterboard can be installed only in a 12B or 24B keyset. The KDB-SLI provides one
additional SLI circuit for the connection of any standard (single line) telephone. This KDB-SLI
will only operate when the keyset is connected to a DLI port on the base board so it can use
the second B channel. Each port is intended for connection to one telephone. Connecting
multiple telephones to a port may result in incorrect operation. (See Chapter 3 of the Sam-
sung iDCS100 Installation Manual for details.)
NOTE: The circuitry on a KDB-SLI does not provide a loop open disconnect signal or have
the over-voltage protection necessary for OPX operation.
Figure 2–8 48 Button AOM