Filter
Top Products
4-3
Forced (Verified)
When set for this option the user must enter an account code for all outgoing calls. The account code
entered will be verified from a system list of 500 entries. Forced (Verified) codes can contain the digits
0–9.
Forced (Not Verified)
When set for this option, the user must enter an account code for all outgoing calls, but the account
code is not verified against the system list. Non-verified account codes can contain the digits 0–9, 4
and #.
Voluntary
In this case, account codes are not required to make outgoing calls but may be used if desired. This is
also the method used to assign an account code to incoming calls. These account codes can contain
the digits 0–9 and #.
Account Code Key
The account code (ACCT) key can be programmed on any keyset and will appear as a soft
key on display keysets. This key allows the user to enter account codes without interrupting a
call.
All Call Voice Page
Users can page zone 1 and all external paging zones at the same time by dialling the All
Page code. Keysets may be restricted from making or receiving pages in system program-
ming. A maximum of 40 keysets can be programmed in each internal page zone to receive
page announcements.
Attention Tone
To get users’ attention, a brief tone precedes all page announcements and internal voice
calls. There are separate programmable duration timers for page and voice announce tones.
Authorisation Codes
Authorisation codes give permission to make a call. A maximum of 250 four-digit authorisa-
tion codes can be either forced or voluntary. When used, authorisation codes will automati-
cally change the dialling station’s class of service to the level assigned to the authorisation
code. Authorisation codes may be programmed to print, or not print, on SMDR.
Forced
When a station is programmed for forced authorisation, the user must always enter this code before
dialling is allowed. The dialled authorisation code is verified from the system list of 250 authorisation
codes.
Voluntary
Any station user can always enter an authorisation code before they begin dialling. The dialled au-
thorisation code is verified from a system list of 250 codes.