Filter
Top Products
4-14
Chapter 4
Business Features Package
Least Cost Routing
Least Cost Routing (LCR) is the ability to automatically select the most cost effective central
office route for the outside number dialled by any station. The iDCS100 LCR program in-
cludes the following features:
y Option to use or not use LCR
y
Programmable LCR access code
y Digit analysis table: 1000 entries, each with 10 digits
y Routing by time of day and day of week (four time bands per day)
y Routing according to individual station class
y
Modify digits table: 100 entries
y Flexible trunk group advance timer
y Option to use or not use trunk group advance warning tones
Live System Programming
The system can be programmed from any display keyset or PC without interrupting normal
system operation. There are three levels of programming: technician (or system), customer
and station. The technician (system) level has access to all programs and can allow the cus-
tomer access to system programs as needed. Technician and customer access are con-
trolled by different security passcodes. Programming from a PC requires the PCMMC pro-
gram.
Meet Me Page and Answer
After a user makes a Meet Me Page, the user may remain off-hook to allow the paged party
to meet the user for a private conversation.
Memory Protection
In the event that system power is lost, all customer data contained in memory is retained by
the use of a “super capacitor” for approximately 7 days. In addition, the PCMMC program
may be used to produce a backup copy of the customer database.
Message Waiting Indications
When calling a station and receiving a busy signal or no answer, the caller can leave an indi-
cation that a message is waiting. The message key will flash red at the messaged keyset. A
single line telephone will receive a distinctive message waiting dial tone. Five message
waiting indications can be left at a station at any one time.
Microphone On/Off Per Station
The microphone can be disabled at any keyset. When the microphone is disabled, the keyset
cannot use the speakerphone, although on-hook dialling and group listening are still possible.
Music-On-Hold (MOH)—Flexible
The iDCS100 allows its music sources to be used in a very flexible manner.
Each keyset can have a designated music source for playing as Background Music (BGM)
through the keyset speaker.