Filter
Top Products
23
INSIGHT
A
S
A
S
DIAGNOSTIC MODE (ONLY IF MANUALLY ACTIVATED)
Immediately following manual (push button) activation, the INSIGHT lights all segments of the LCD
and initiates a countdown sequence (Fig. 10). Following the countdown sequence (from 8, -, 9, 8, 7, 6,
5, 4, 3, 2, 1, 0) which takes about 2 seconds, it verifies that sensor readings and battery voltage are
within tolerance. If values are satisfactory, it enters Surface Mode displaying the TIME screen.
When the A (Left) button is held depressed and as the Diagnostic countdown reaches 00, a Serial
Number screen appears displaying the unit’s Serial Number and firmware code Revision Number as
long as the button is held depressed (Fig. 11). Upon releasing the button, the unit shuts Off.
Once the unit is activated, regardless of what mode it is in, it automatically reverts to DIVE MODE
upon descending to 5 FT (1.5 M) for 5 seconds.
SURFACE SCREENS
TIME SCREEN
The TIME screen appears immediately following diagnostics (if manually activated) on a new day, or
upon re-activation in FLY/DESAT MODE.
If the unit is wet, the alpha graphic WET replaces the alpha graphic TIME. Once the unit is dry, the
WET graphic is replaced by the TIME graphic.
The graphic TIME (or WET) flashes during the first 10 minutes after a dive.
Fig. 10 - Diagnostics
Fig. 11 - Serial No.