Filter
Top Products
50
A
S
A
S
To access SET UNITS while viewing the SET 3 GO TO screen, press/release the A button (2 times)
until the Set screen appears (Fig. 49) -
• Alpha graphics FT (or M) and F (or C) with ° and FEET (or METERS) icons, all flashing
> Pressing and releasing the S button toggles between Imperial and Metric units.
> Pressing and releasing the A button saves the Set Point and advances to SET SAMPLE RATE.
> Depressing both buttons for 2 seconds reverts to the TIME/WET screen.
• Operation reverts to the TIME/WET screen if neither button is pressed in 2 minutes.
SET SAMPLE RATE
SAMPLE RATE is the Rate at which data is sampled for storage in memory for subsequent download
to the associated PC Interface software program. This setting has no effect on the rate at which data is
sampled for screen displays that you view during unit operation.
Factory set for a Rate of 15 seconds (which allows about 25 dive hours of data), Sampling Rate can
also be set for 30 seconds (for 50 dive hours) or 60 seconds (for 100 dive hours).
To access SET SAMPLING RATE while viewing the SET 3 GO TO screen, press/release the A but-
ton (3 times) until the Set screen appears (Fig. 50) -
• Alpha graphic SAMP
• Sampling Set Point :15 (or :30 or :60) seconds flashing with TIME icon
Fig. 49 - Set Units
Fig. 50 - Set Sampling
Rate