Sherwood CR2709 Scuba Diving Equipment User Manual


 
42
A
S
SET 2 GROUP (ALARMS)
Pressing and releasing the S button momentarily 2 times, while the SET GO TO screen is displayed, will access the SET 2 GO
TO screen.
Pressing and releasing the A button 1 time, while the SET 2 GO TO screen is displayed, will access the SET ALL ALARMS
screen with the Set Point flashing.
SET ALL ALARMS ON/OFF
Factory set ON, All Alarms can also be set OFF. When set OFF, All Alarm settings are bypassed and the Audible Alarm is
turned OFF for the Alarms that could be set On/Off. Information displayed includes (Fig. 38) -
• Alpha graphics ALL and AL
• Set Point graphic ON (or OFF), flashing
> Pressing and releasing the S button toggles between ON and OFF.
> Pressing and releasing the A button saves the Set Point and/or advances to SET ASCENT ALARM
(if ON is selected), or SET 2 GO TO (if OFF is selected).
> Depressing both buttons for 2 seconds reverts to the TIME/WET screen.
• Operation reverts to the TIME/WET screen if neither button is pressed in 2 minutes.
SET ASCENT ALARM ON/OFF
Factory set ON, the ASCENT ALARM can also be set OFF. When set OFF, the Alarm will not sound
when Ascent Rate exceeds the recommended max rate.
Fig. 38 - Set All Alarms