Filter
Top Products
34
A
S
HISTORY 2 screen (Fig. 25)
• Alpha graphic HIST
• Minimum Temperature attained with degrees icon and graphic F (or C)
• Graphic SEA (or L - 2 through L - 7, or out) representing the highest Altitude at which a dive was
conducted
• Graphics Lo:Hi indicating that the Temperature was Lowest and Altitude Highest
> Pressing the S button will revert to the HISTORY 1 screen.
While viewing a History screen -
> Pressing both buttons for => 2 seconds reverts to the TIME/WET screen.
• Operation reverts to the TIME/WET screen if neither button is pressed in 2 minutes.
SIMULATOR
Simulator Mode allows you to perform dive mode scenarios without getting wet. It also allows you to perform simulated New
or Continuous (repetitive) dives and set simulated Surface Interval time. Calculations performed for simulated dives utilize the
dive computer’s real settings (i.e., FO2, Alarm values that you previously set, etc.).
10 minutes after a Non Violation Dive, pressing the A button 6 times accesses the Simulator Mode.
(TIME >> DATA >> PLAN >> LAST >> LOG >> HIST >> SIMU)
Entering Simulator Mode displays the SIMULATOR GO TO screen.
Fig. 25 - History 2