Filter
Top Products
53
INSIGHT
A
S
To access SET TIME while viewing the SET 4 GO TO screen, press/release the A button 2 times. In-
formation displayed includes (Fig. 53) -
• Alpha graphic AM or PM (if set for 12 Hour Format), or 24HR (if set for 24 Hour Format)
• Time of Day (hr:min), Hour digits flashing, with TIME icon
> Depressing and holding the S button will scroll upward through the HOUR Set Points from 12:
AM through 11: PM (if set for 12 Hour Format), or 0: through 23: (if set for 24 Hour Format) in
increments of 1: (1 Hour) at a rate of 8 Set Points per second.
> Pressing and releasing the S button repeatedly (< 2 sec each time) steps upward through the Set
Points 1 at a time.
> Pressing and releasing the A button saves the Set Point and the Minute digits flash.
> Depressing and holding the S button will scroll upward through the MINUTE Set Points from
:00 through :59 in increments of :01 (1 Minute) at a rate of 8 Set Points per second.
> Pressing and releasing the S button repeatedly (< 2 sec each time) steps upward through the Set
Points 1 at a time.
> Pressing and releasing the A button saves the Set Point and accesses the SET DATE screen with
the YEAR Set Point flashing.
> Depressing both buttons for 2 seconds reverts to the TIME/WET screen.
• Operation reverts to the TIME/WET screen if neither button is pressed in 2 minutes.
SET DATE
Factory set for January 1, 2008 (1.1 represents January 1st), the Year, Month, and Day can be set as
follows.
Fig. 53 - Set Time of Day