Filter
Top Products
71
INSIGHT
ANNUAL INSPECTIONS AND SERVICE
Your Insight should be inspected annually by an Authorized Sherwood Scuba Dealer who will perform a factory prescribed
function check and inspection for damage or wear. To keep the 2 year limited warranty in effect, this inspection must be com-
pleted one year after purchase (± 30 days). The original sales receipt and owner's portion of the Warranty Registration Card
must be presented at the time of service. It is recommended that you have this inspection performed even after the warranty pe-
riod has expired to ensure your Insight is working properly.
A service record is provided in the back of this manual for your convenience. It should be signed by the Authorized Sherwood
Dealer service technician after each annual inspection or factory service. The costs of annual inspections are not covered under
the terms of the 2 year limited warranty.
WARNING: If you are in doubt about the accuracy of your Insight's depth readings, DO NOT attempt
to dive with it until it has been inspected by an Authorized Sherwood Scuba Dealer.
The facility conducting the depth check must have a pressure test chamber that is capable of pressurizing the Insight to its
maximum operating depth (399 FT/120 M). Also, the test gauge on the pressure test chamber must be as accurate as the Depth
Sensor in the Insight (±1% of full scale).
CAUTION: Never pressure test the Insight in an air environment. Doing so may damage the Depth
Sensor; possibly resulting in erroneous depth or time readings.
It is possible to damage the Insight Depth Sensor if it is not pressure tested properly. The Insight must be placed completely
underwater when being pressure tested to protect the Depth Sensor.