Filter
Top Products
37
INSIGHT
A
S
When the Simulator Ascents and Descents are stopped, depressing/holding the S button (> 2 sec) in-
creases Elapsed Dive Time 1 minute per real 10 seconds (6 times).
Upon ascending to 2 FT (1 M) for 1 second, the Simulator SURF screen will be displayed.
ENTERING SETTINGS
The Settings are divided into groups consisting of Modes/Basics, Alarms, Utilities, and Time/Date.
Except for FO2, settings can also be changed using the PC Interface program.
Set 1 (Modes/Basics) - Operating Mode (Air, Nitrox, or Gauge), PO2 Value, FO2, FO2 Default
Set 2 (Alarms) - All (On/Off), Ascent, Depth, Elapsed Dive Time, Reserve Time, Deco, PO2 (On/Off)
Set 3 (Utilities) - Wet Activation (On/Off), Units of Measure, Sample Rate, Deep Stop (On/Off)
Set 4 (Time) - Hour Format, Time, Date
While the TIME/WET screen is displayed, pressing the A button 7 times momentarily and repeatedly
(< 2 sec each time) will access the SET GO TO screen.
(TIME >> DATA >> PLAN >> LAST >> LOG >> HIST >> SIMU >> SET)
SET GO TO screen (Fig. 32)
• Displayed are the alpha graphics SET and Go to -
Fig. 32 - Set Access