Filter
Top Products
49
INSIGHT
A
S
SET 3 GROUP (UTILITIES)
Pressing and releasing the S button momentarily 3 times, while the SET GO TO screen is displayed,
will access the SET 3 GO TO screen.
Pressing and releasing the A button 1 time, while the SET 3 GO TO screen is displayed, will access
the SET H2O SENSOR screen with the Set Point flashing.
SET H2O SENSOR ON/OFF
Factory set ON, the H2O SENSOR (Wet Activation) can also be set OFF. When set OFF, the unit will
not activate when it becomes wet. Information displayed includes (Fig. 48) -
• Alpha graphics H2O and SENSOr
• Set Point graphic ON (or OFF) flashing
> Pressing and releasing the S button toggles between ON and OFF.
> Pressing and releasing the A button saves the Set Point and advances to SET UNITS.
> Depressing both buttons for 2 seconds reverts to the TIME/WET screen.
• Operation reverts to the TIME/WET screen if neither button is pressed in 2 minutes.
SET UNITS
Factory set for Imperial, Units of Measure can also be set for Metric.
• Units of Measure must be set prior to setting selections that contain numerical values.
Fig. 48 - Set H2O Sensor