Filter
Top Products
Simrad EQ60
100
857-164342 / Rev.C
Printer and History
The Printer and History dialogue box allows you to control
the output to the system’s colour printer.
The dialogue is accessed by the Print command on the File
menu.
Print
Check this box if you want the echogram printing to be active.
If the printer is switched on and active, a small printer symbol is
shown inside the Status bar.
Text to Printer
Status - Check this box if you want status messages to be
printed.
Navigation - Check this box if you want position strings to be
printed. Navigation receivers typically output a new position fix
every second, and it is not practical to print them all on top of
the echogram. The count parameter in the spin box reduces the
rate of printing of the position strings. Every tenth position fix is
printed when this parameter is set to ten.
Annotation - Check this box if you want annotations to be
printed.