Filter
Top Products
Simrad EQ60
158
857-164342 / Rev.C
Split beam transducer connected as single beam
The drawing shows how to connect a split beam transducer to a
single beam system.
W802-5 / Rev.C
Split beam transducer connected as single beam
Single frequency, split beam
transducer
C
D
GPT
Junction Box (1:1)
Ch.1
Ch.3
Ch.2
Forward
Aft
Starboard
Port
Ch.4
Blue
Blue
Blue
Blue
Black
Black
Black
Black
M
E
F
J
H
D
C
K
L
A
B
N
Inner
screen
Outer
screen
Note:
1) All transducer cables must be run in
steel conduits. Use flexible conduit closer
to the transceiver.
2) Cable shields must be connected to
the plug housing.
3) Cable shields must be connected to
ship's ground in the junction box.
not
Plug housing
Ch.4
Ch.3
Ch.2
Ch.1
Conductors 4x2xNmm2
Screen Overall braided
Voltage 600 V
Max.diameter N/A
The conductor diameter “N” depends on the chosen transducer.
Normal value for single beam transducers is 1.5 mm
2
.Special
transducer cable is available from Simrad.