Filter
Top Products
Simrad EQ60
176
857-164342 / Rev.C
Summary
Some of the above guide lines are conflicting, and each case has
to be treated individually in order to find the best compromise.
Generally the propeller noise is the dominant factor, and a
recommended transducer location is in the fore part of the hull,
with maximum distance from the bow equal to one third of the
total length of the hull at the water line.
→ See figure 17.
If the vessel hull has a bulbous bow, this may well be a good
transducer location, but also here must be taken into
consideration the flow pattern of the aerated water. Often the
foremost part of the bulb is preferable.
→ See figure 18.
Figure 18 Transducer location on a bulbous bow
Transducer
(CD3007)
Thruster