Filter
Top Products
Operational procedures
49
857-164342 / Rev.C
The playback is started as follows:
1 Select Operation on the File menu.
- Observe the Operation dialogue box appear.
2 Click Replay.
3 Click Files...
- Observe the Replay dialogue box appear.
4 Select survey with the standard file selection dialogue.
5 Click on the file(s) you wish to replay.
- Observe that the currently selected file(s) appear in the
Selected files list box.
6 Click Loop if you wish the replay to loop through the
selected file(s) endlessly.
7 Click Save Output Data if you wish to record the file(s)
in processed format during playback.
- The files are stored with the same name and in the
same location as the raw data files, but with the file
extension *.OUT
8 Click OK to return to the Operation dialogue box.
9 In the Operation dialogue box, click OK to start the
playback.
If you do not select Loop, the replay is stopped when the last
recorded ping has been processed.
Related topics
→ Operation, page 97.
→ Replay, page 105.
History
The History function is used to store echograms on bitmap
format. The echo sounder may continuously save echogram
pictures to the internal harddisk or an other recordable media.
These can later be recalled on the display. The information in
the History window is the same as on the printer.
The horizontal width of each echogram picture roughly
corresponds to the the half width of the display. The number of
history files is limited. After reaching the maximum number of
files, the newest echogram picture overwrites the oldest one.
The history function allows you to quickly look through
echogram pictures covering several hours.
Record
To start History recording: