Filter
Top Products
Instruction manual
113
857-164342 / Rev.C
The frequency channel number identifies individual channels
within a multi-frequency channel transceiver.
Frequency channels
Hence, the echo sounder system consists of a number of
frequency channels. Entries in the frequency channel list are
shown in black, green or red colour. Detected channels that are
not installed are shown in black. The phrase NONE replaces the
transducer type name for uninstalled channels. Detected
channels that are installed are shown in green colour. Installed
channels that were not detected during the search for
transceivers are shown in red colour.
Each entry in the Frequency Channel Selection list belongs to
a transceiver. The lower part of this dialogue box displays
information about the currently selected transceiver. The first
information line displays the transceiver personality string.
Remaining lines display specific transceiver information.
Set new GPT IP Address
The communication on the Ethernet network between the echo
sounder computer and the General Purpose Transceiver(s)
complies to the TCP/IP (Transport Control Protocol / Internet
Protocol) family of protocols. Every host (GPT or computer)
connected to the network must have a unique 32-bit IP address.
To modify the GPT IP address, refer to the IP Address dialogue
box.
Related topics
→ To install or uninstall a channel, page 45
→ To modify an IP Address, page 46
→ IP Address, page 91