Conveying System Mechanical Components Chapter 2: Functional Description 17 of 138
Material characteristics determine the type of equipment needed to properly convey the
material.
See Figures 22 and 26 on pages 49 and 52 for typical system configurations.
2-3 Standard Features & Options
SSI Series Inventory Vacuum Receivers
Models: SSI03, SSI06, SSI11
• Brushed stainless steel construction, with stainless steel product
contact surfaces.
• Pyrex™ sight glass.
• Receiver capacities of 0.1, 0.2, and 0.4 cu. ft. (2.8, 5.6, and 11.3 liters).
• Ten (10) -mesh stainless steel pellet deflector screen.
• Designed for minimum inventory on molding machine.
• Four-inch (101.6 mm) -sq. flange on 0.1 cu. ft. (2.8 liter) model.
• Seven-inch (177.8 mm) -sq. flange on 0.2 and 0.4 cu. ft. (5.6 and 11.3
liter) models.
• Side inlet/outlet design.
• Removable inlets and outlets, up to 2” O.D. on 0.2 and 0.4 cu. ft (5.6
and 11.3 liter) models; material inlet is check valve-ready.
• Check valve for single-line Y applications.
• Adjustable proximity-type material level sensor (mounted on sight
glass): 24 VDC or 115 VAC.