Filter
Top Products
P/N 06160D DCN6409 Teledyne API Model 465M O
3
Monitor Instruction Manual - Page 17
4.3. AC Power Connection (for Monitors in
NEMA 4X Enclosures)
CAUTION
Disconnect power to the AC mains before making or removing
any electrical connections to the M465M.
CAUTION
A proper earth ground connection must be made to the
receptacle labeled “Earth Ground” on the 3 pin AC connector.
Failure to do so may result in a shock hazard and malfunction
of the monitor
1. Install a ½” conduit fitting for routing the electrical wiring into the monitor through
the hole provided in the bottom face of the NEMA enclosure; an appropriate sealed
conduit connector should be used.
2. Attach the leads of the power line to the AC power connector (see Figure 4-6).