Filter
Top Products
P/N 06160D DCN6409 Teledyne API Model 465M O
3
Monitor Instruction Manual - Page 41
7.2.6. SETUP-ALARM Menu
The ALARM menu allows the operator to view and edit properties of the concentration
alarms. The table below summarizes the alarm configuration settings.
Table 7-7: Alarm Configuration Settings
Property Meaning Default
Value
Range
HI ALARM HI alarm trigger value 10 PPM 10 - 9999
PPM
HIHI ALARM HI-HI alarm trigger value 20 PPM 10 - 9999
PPM
ON/OFF HI
ALARM
HI alarm enable, enables HI alarm
operation
ON ON/OFF
ON/OFF HI HI
ALARM
HI-HI alarm enable, enables HI-HI
alarm operation
ON ON/OFF
7.2.7. CONFIG Menu
The CONFIG menu displays important information about the instrument. The Serial
Number, COMM address settings, and the latest revision of software installed are
information available in the CONFIG menu. Settings can be changed under other menus
(see Sections 7.2.3, 7.2.5, and 7.2.6); however the CONFIG menu just contains
instrument-specific information.