Filter
Top Products
P/N 06160D DCN6409 Teledyne API Model 465M O
3
Monitor Instruction Manual - Page 44
6. For RS-232 operation, set SW2 to either DTE or DCE (See Section 8.3) For RS-
485 operation, set SW2 to DCE.
7. Re-install the instrument cover.
8. Re-connect power to the instrument.
9. The software portion of the COM port configuration will now automatically be
completed after the next instrument boot-up.
Close Indicated Positions Only
RS232
ETHERNET
RS485
765
4
3
21
SW3
1098
RS232 Configuration
Close Indicated Positions Only
RS232
ETHERNET
RS485
765
4
3
21
SW3
RS485 Configuration
1098
RS232
Close Indicated Positions Only
ETHERNET
RS485
SW3
12
3
4
567
Ethernet Configuration
8910
Figure 8-1: Com Configuration Jumper Settings (SW2)