Filter
Top Products
P/N 06160D DCN6409 Teledyne API Model 465M O
3
Monitor Instruction Manual - Page 21
4.4.2. Exhaust Connection
Connect a ¼” OD vent line to the “Exhaust” fitting on the rear panel. This line must be
vented outdoors or to an appropriate discharge system capable of handling ozone. Local
regulations regarding the discharge of ozone to the atmosphere must be observed. Note
that the monitor may be equipped with an internal ozone scrubber for removal of ozone
from the exhaust stream. For safety reasons, the exhaust port must still be vented
appropriately as described above.
CAUTION
Exhaust gas from the M465M may contain dangerous
levels of ozone! Do not vent this gas into enclosed or
occupied areas.
Figure 4-5: Rear Panel Electrical I/O Connections