Filter
Top Products
P/N 06160D DCN6409 Teledyne API Model 465M O
3
Monitor Instruction Manual - Page 48
8.5.3. Determining a Dynamically Assigned IP
Address (DHCP Mode)
The DeviceInstaller software application (See Section 8.5) can be used to search a
network for instruments and determine the IP Address assigned by a DHCP server.
1. Click Start->Programs->Lantronix DeviceInstaller->DeviceInstaller. If
your PC has more than one network adapter, a message displays. Select an
adapter and click OK.
2. Click on the Search icon. After a moment a list of instruments on the network
will be displayed. The M465M should be listed as an XPORT-IAP type device.
3. Double-click on the device in the right-hand section of the
DeviceInstaller
window; a list of configuration parameters will be shown, including the IP
Address. If multiple devices are shown, the correct one can be determined by
matching the Hardware Address shown with the address printed on the label of
the Ethernet module in the M465M.
8.5.4. Manually Assigning a Static IP Address
For applications where the IP Address must remain constant, a static IP Address can be
manually assigned to the instrument and the DHCP function must be disabled.
1. Click Start->Programs->Lantronix DeviceInstaller->DeviceInstaller. If
your PC has more than one network adapter, a message displays. Select an
adapter and click OK.
2. Click the Assign IP icon .
3. If prompted, enter the hardware address (on the product label) and click Next.
4. Select Assign a specific IP address and click Next.
NOTE
The instrument cover must be removed to inspect this address in
the instrument.
NOTE
If the unit already has an IP address (e.g., DHCP has assigned an
IP address), click the Search icon and select the unit from the list
of Lantronix device servers on the local network.